The maximum number of products that can be compared is 4. Please refine your selection.
-
Extended
Inventory
Square D LC1D32LE7 600 VAC 32 Amp 3-Pole 1NO 1NC Screw Terminal Full Voltage Non-Reversing IEC Contactor
| MFG Part #: | LC1D32LE7 |
|---|---|
| UPC: | 78590129215 78590129215 |
| Online Part #: | 544644 |
Description
Schneider Electric,CONTACTOR 600VAC 32AMP IEC +OPTIONS,208 V AC 50/60 Hz,3 NO,3P,50 A at
Detailed Information
Make and Model
| Online Part #: | 544644 |
|---|---|
| MFG Name: | Schneider Electric |
Specification
| Operating Temperature: | -40-70 A°C AT UC,-5-60 A°C |
|---|---|
| Contact Rating: | 10 A 60 A°C SIGNALLING CIRCUIT-50 A 60 A°C POWER CIRCUIT |
| Size: | 45 MM,85 MM,92 MM |
Prop65_Warning:
|
WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov |
| Mounting: | PLATE-RAIL |
| Operating Cycles: | 25...400 HZ,3600 CYC/H 60 A°C |
| Type: | CONTACTOR |
| Coil Voltage: |
208 V AC 50/60 HZ,POWER CIRCUIT |
| Contact Configuration: | 1 NO + 1 NC,3 NO,MECHANICALLY LINKED 1 NO + 1 NC IEC 60947-5-1-MIRROR CONTACT 1 NC IEC 60947-4-1 |
| Connection: | CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-4 MMA²FLEXIBLE WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-4 MMA²FLEXIBLE WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-4 MMA²FLEXIBLE WITH CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-2.5 MMA²FLEXIBLE WITH CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-4 MMA²SOLID WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-4 MMA²SOLID WITHOUT CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 1 1.5-6 MMA²FLEXIBLE WITHOUT CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 2 1.5-6 MMA²FLEXIBLE WITHOUT CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 1 1-6 MMA²FLEXIBLE WITH CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 2 1-4 MMA²FLEXIBLE WITH CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 1 1.5-6 MMA²SOLID WITHOUT CABLE END-POWER CIRCUIT SCREW CLAMP TERMINALS 2 1.5-6 MMA²SOLID WITHOUT CABLE END |
| Sub Brand: | TESYS D |
| Application: | RESISTIVE LOAD-MOTOR CONTROL |
| Wattage: | 2 Watt AC-3 - 5 Watt AC-1 |
| Standards: | 850 A°C IEC 60695-2-1,CSA C22.2 NO 14-EN 60947-4-1-EN 60947-5-1-IEC 60947-4-1-IEC 60947-5-1-UL 508,IP20 FRONT FACE IEC 60529,UL-RINA-CCC-LROS (LLOYDS REGISTER OF SHIPPING)-DNV-GL-GOST-CSA-BV,V1 UL 94 |
